International Conference
[2024]
Numerical Analysis for Appropriate Positioning of Ferrous Particle Sensor with Permanent Magnet in Gearbox Systems
Sung-Ho Hong, 2024. 07. 29. - 2024. 08. 01.
The 7th International Conference on MaterialStrength and Applied Mechanics (MSAM 2024), University ofGyőr, Hungary (Oral presentation)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Proposal of a New Method for Measuring Wear Scars Using Deep Learning
Sebin Lee, Taewan Kim, Seungchul Lee, Sung-Ho Hong, 2024. 07. 15. - 2024. 07. 17.
The 7th International Conference on MaterialStrength and Applied Mechanics (MSAM 2024), University ofGyőr, Hungary (Oral presentation)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Improving the Sensitivity of Ferrous Particle Sensors with Permanent Magnet in a Lubrication System
Sung-Ho Hong, 2024. 07. 15. - 2024. 07. 17.
Smart Nano 2024, Pullman Bali Legian Beach, Indonesia. (Poster presentation)
[2023]
Improvement the Sensitivity of Ferrous Particle Sensors with Permanent Magnet in Lubrication Systems
Sung-Ho Hong, 2023. 07. 04. - 2023. 07. 07.
The 6th International Conference on Material Strength and Applied Mechanics (MSAM 2023), Macao, China. (Oral presentation)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Formation and Removal of Varnish in Lubrication System
Sung-Ho Hong, Enu-Kyung Jang, 2023. 04. 02. - 2023. 04. 05.
3rd Korea-Tribology International Symposium (K-TRIB 2023), BEXCO, Busan, Korea. (Poster presentation)
[2022]
Experimental Device for Machine Condition Monitoring with Oil Sensors in Construction Equipment
Sung-Ho Hong, 2022. 07. 10. - 2022. 07. 15.
WTC-2022-7th World Tribology Conferences. (Poster presentation)
[2021]
CFD Analysis of Trap Effect of Groove in Sliding Bearing
Sung-Ho Hong, 2021. 07. 05. - 2021. 07. 07.
Malaysian International Tribology Conference (MITC 2020), Online.
[2018]
Lubrication Characteristics in Fuel Injection Pump with Variation of Groove type for Medium-Speed Diesel Engines
Sung-Ho Hong, 2018. 09. 17. - 2018. 09. 20.
Proceedings of Asia International Conference on Tribology 2018, Kuching, Sarawak - Malaysia, pp. 136-137. (Oral presentation)
[2017]
Design of Accelerated Life Test for Joint Bearing of Construction Equipment Attachments Based on Wear Rate
Hong-Gyu Jeon, Sung-Ho Hong, Jae-Hyeong Yoo, Young-Ze Lee, 2017. 03. 19. - 2017. 03. 22.
4th International Tribology Symposium of IFToMM (ITS-IFToMM 2017), 1st K-Tribology International Symposium (K-TIS 2017), Ramada Plaza Hotel, Jeju, Korea. (Poster presentation)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A New Application of Spiral Groove in Reciprocating Fuel Pump for Medium-Speed Diesel Engines
Sung-Ho Hong, Bora Lee, Yongjoo Cho, 2017. 03. 20.
4th International Tribology Symposium of IFToMM (ITS-IFToMM 2017), 1st K-Tribology International Symposium (K-TIS 2017), Ramada Plaza Hotel, Jeju, Korea. (Oral presentation)
[2011]
A Comparative Study of Navier-Stokes Equation & Reynolds Equation in Simulating Spool Valve
Sung-Ho Hong, S.I.Son, K.W.Kim, 2011. 10. 24 - 2011. 10. 26.
International Joint Tribology Conference-IJTC2011, Los Angeles, USA, pp. 207-209. (Oral presentation)
[2010]
CFD Analysis of Spool Valve with Different Shaped Groove Considering Cavitation
Sung-Ho Hong, K.W.Kim, 2010. 12. 05. - 2010. 12. 09.
International Tribology Congress-ASIATRIB 2010, Perth, Australia. (Oral presentation)
[2008]
Analysis of EHL Considering the Number of Rolling Elements and the Shaft Load in Ball and Roller Bearings
Sung-Ho Hong, Dong-Hyun Lee, Kyung-Woong Kim, 2008. 12. 03
2nd International Conference on Advanced Tribology 2008, National University of Singapore, Singapore, pp. 506-508. (Oral presentation)
Domestic Conference
[2024]
Deep Learning-Based Compound Fault Diagnosis of Bearing Using Acoustic Emission Signals
Moonsuk Kim, Hangyeol Jo, Dai Miao,Sung-Ho Hong, Sang-Woo Ban, 2024.11.18- 2024.11.20.
Korea Wind Energy Association, KWEA Spring Conference (Lotte Hotel, Jeju), pp.241-242.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Composite Fault Diagnosis of Wind Turbine Bearings Using Deep Learning-Based ID CNN Model
Dai Miao, Hangyeol Jo, Moonsuk Kim, Sung-Ho Hong, Sang-Woo Ban, 2024.11.18- 2024.11.20.
Korea Wind Energy Association, KWEA Spring Conference (Lotte Hotel, Jeju), pp.239-240.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Influence of Nanoparticles and oxidation process on the tribological characteristics of vegetable oil
Geon Kim,Sung-Ho Hong, Hyun-Jun Kim, 2024.10. 16. - 2024. 10. 18.
Korean Tribology Society, 76th KTS Autumn Conference (The Ocean, Yeosu), pp. 127.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A New Design of Journal Bearings for Stability Under Shock Loads
Sung-Ho Hong, 2024.10. 16. - 2024. 10. 18.
Korean Tribology Society, 76th KTS Autumn Conference (The Ocean, Yeosu), pp. 78.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Study on the Condition Diagnosis of Ball Bearing Using Ultrasonic, Vibration and Acoustic Emission Sensors
Sung-Ho Hong, Choon-Su Park, 2024.10. 16. - 2024. 10. 18.
Korean Tribology Society, 76th KTS Autumn Conference (The Ocean, Yeosu), pp.77.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ball Bearing Fault Diagnosis Model Based on Multi-Sensor for Wind Turbine Condition Monitoring
Hangyeol Jo, Moonsuk Kim, Dai Miao, Sung-Ho Hong, Sang-Woo Ban, 2024.06.10- 2024.06.12.
Korea Wind Energy Association, KWEA Spring Conference (Ramada Plaza, Jeju).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Diagnosis of Ball Bearing Faults Using ID Convolution Model for Wind Turbine
Dai Miao, Moonsuk Kim, Hangyeol Jo, Sung-Ho Hong, Sang-Woo Ban, 2024.06.10- 2024.06.12.
Korea Wind Energy Association, KWEA Spring Conference (Ramada Plaza, Jeju).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Ball Bearing Abnormal Diagnosis Based on Using Acoustic Emission Signals
Moonsuk Kim, Hangyeol Jo, Dai Miao, Sung-Ho Hong, Sang-Woo Ban, 2024.06.10- 2024.06.12.
Korea Wind Energy Association, KWEA Spring Conference (Ramada Plaza, Jeju).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Tribological Characterictics of Vegetable Oil and Nanoparticle Additive for Eco-friendly Lubricant Application
Geon Kim, Sung-Ho Hong, Hyun-Joon Kim, 2024. 04. 17. -2024. 04. 19.
Korean Tribology Society, 75th KTS Spring Conference (Sono calm, Jeju), pp. 92.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Evaluation of Wear Volume Based on Measurement of Wear Scars Using Deep Learning
Se-Bin Lee, Sung-Ho Hong, Seung-Chul Lee, 2024. 04. 17. -2024. 04. 19.
Korean Tribology Society, 75th KTS Spring Conference (Sono calm, Jeju), pp. 92.
[2023]
Research on Condition Monitoring of Axles in Construction Equipment with Ferrous Particle Sensor
Sung-Ho Hong, 2023. 11. 15. - 2023. 11. 19.
The Korean Society of Automotive Engineers, KSAE 2023 Annual Autumn Conference and Exhibition (UECO, Ulsan), pp. 1778.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Evaluation of Replacement Timing of Automobile Engine Oils
Ju-Yong Shin, Sang-Hoo Lee, Tae-Sung Park, Sung-Ho Hong, 2023. 11. 15. - 2023. 11. 19.
The Korean Society of Automotive Engineers, KSAE 2023 Annual Autumn Conference and Exhibition (UECO, Ulsan), pp. 1327.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Research on condition diagnosis with ferrous particle sensor for wind turbine gearbox
Sung-Ho Hong, 2023. 11. 13. - 2023. 11. 15.
Korea Wind Energy Association, 2023 KWEA Autumn Conference (Maison Glad Je-Ju), pp. 156.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Evaluation of waste oils for automotive engines
Ju-Yong Shin, Tae-Sung Park, Sang-Hoo Lee, Sung-Ho Hong, 2023. 10. 18. - 2023. 10. 20.
Korean Tribology Society, 74th KTS Autumn Conference (Sonobell, Gyeongju), pp. 114-115.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Method for measuring of a wear scar based on deep learning
Se-Bin Lee, Tae-Wan Kim, Seung-Chul Lee, Sung-Ho Hong, 2023. 10. 18. - 2023. 10. 20.
Korean Tribology Society, 74th KTS Autumn Conference (Sonobell, Gyeongju), pp. 15-16.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Research on position selection of ferrous particle sensors in lubrication systems
Sung-Ho Hong, 2023. 10. 18. - 2023. 10. 20.
Korean Tribology Society, 74th KTS Autumn Conference (Sonobell, Gyeongju), pp. 14.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Research on Improving the performance of ferrous particle sensors
Sung-Ho Hong, 2023. 10. 18. - 2023. 10. 20.
Korean Tribology Society, 74th KTS Autumn Conference (Sonobell Gyeong-ju), pp. 13.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Multi-Physics Analysis for Positioning of Ferrous Particle Sensor in Gearbox Condition Diagnosis
Sung-Ho Hong, 2023.06.02.
The Korean Society of Mechanical Engineers, KSME Spring Conference 2023 (Mechatronics & Materials Institute, Daegu), pp. 13.
[2022]
Condition Monitoring with Oil Analysis in Mechanical System
Sung-Ho Hong, 2022. 11. 02. - 2022. 11. 05.
Korea Society for Noise and Vibration Engineering, KSNVE Autumn Conference (Phoenix ISLAND, Jeju).
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of an Integrated Oil Purification Device
Nam-Hwa Jeong, Gyeong-Hee Lee, Sung-Ho Hong, 2022. 10. 26. - 2022. 10. 28.
Korean Tribology Society, 73th KTS Autumn Conference (Sonocalm Delpino, Goseong), pp. 61.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Condition Diagnosis of Hydraulic Oil with Integrated Oil Sensor
Sung-Ho Hong, Hong-Guy Jeon, 2022. 10. 26. - 2022. 10. 28.
Korean Tribology Society, 73th KTS Autumn Conference (Sonocalm Delpino, Goseong), pp. 62.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Design of Size-Adjustable Mop
Hye-Hyun Moon, Sung-Ho Hong, 2022. 10. 26. - 2022. 10. 28.
Korean Tribology Society, 73th KTS Autumn Conference (Sonocalm Delpino, Goseong), pp. 156.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Awning Design with Improved Drying Function
Hye-Hyun Moon, June-Hyuk Lee, Sung-Ho Hong, 2022. 10. 26. - 2022. 10. 28.
Korean Tribology Society, 73th KTS Autumn Conference (Sonocalm Delpino, Goseong), pp. 155.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Test Equipment for Condition Diagnosis of Wind Turbine Gearbox
Sung-Ho Hong, Yun-Ho Seo, Choon-Su Park, 2022. 06. 20. - 2022. 06. 22.
Korea Wind Energy Association, KWEA Spring Conference (Ramada Plaza, Jeju),
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Study on Application of a Monitoring System for Hydraulic Oil Using an Oil Sensor
Hong-Gyu Jeon, Sung-Ho Hong, 2022. 04. 20. - 2022. 04. 22.
Korean Tribology Society, 72th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 81.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3-D Numerical Analysis of Trap Effect in Groove
Sung-Ho Hong, 2022. 04. 20. - 2022. 04. 22.
Korean Tribology Society, 72th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 80.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Oil Flushing System Combined with Micro-Bubble Generator
Sung-Ho Hong, Kyung-Hee Lee, Nam-Hwa Jeng, 2022. 04. 20. - 2022. 04. 22.
Korean Tribology Society, 72th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 79.
[2021]
Lubrication Characteristics of Hydraulic Oil Contamination in Construction Equipments
Sung-Ho Hong, Min-Gyu Jeong, Hye-Seon Son, Jung-Hwan Ahn, Hong-Gyu Jeon 2021. 10. 20. - 2021. 10. 22.
Korean Tribology Society, 71th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 175.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Condition Monitoring of Wind-Turbine Based on Lubricant Analysis
Sung-Ho Hong, Doo-Gyu Yoon, Sang-Hun Lee 2021. 10. 20. - 2021. 10. 22.
Korean Tribology Society, 71th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 174.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Dielectric Constant Sensor for Measurement of Lubricant Properties
Sung-Ho Hong, Moon-Sik Kang, 2021. 10. 20. - 2021. 10. 22.
Korean Tribology Society, 71th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 105.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Detachable Cellphone Holder
Doo-Gyu Yoon, Dong-Jun Yoo, Jae-Hong Oh, Sung-Ho Hong, 2021. 10. 20. - 2021. 10. 22.
Korean Tribology Society, 71th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 28.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Travel Carrier with Built-in Wheels
Dong-Hun Lee, Do-Won Youn, Sang-Hwa Lee, Sung-Ho Hong, 2021. 10. 20. - 2021. 10. 22.
Korean Tribology Society, 71th KTS Autumn Conference (Ramada Plaza, Jeju), pp. 27.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Experimental Device for Analysis of Hydraulic Oil Characteristics with Dielectric Constant Sensors
Sung-Ho Hong, Yun-Soo Seok, Jong-Hyun Choi, Hong-Gyu Jeon, 2021. 04. 22.
Korean Tribology Society, 70th KTS Spring Conference (Online), pp. 57-58.
[2020]
Experimental Device for Machine Condition Monitoring with Various Oil Sensors
Sung-Ho Hong, Eun-Hyo Seon, Seo-Hyun Jun, In-Seop Kim, Hong-Gyu Jeon, 2020. 12. 16. - 2020. 12. 19.
The Korean Society of Mechanical Engineers, KSME Conference 2020 (Online), pp. 354-355.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Durability Test Device for Axle of Construction Equipment with Ferrous Wear Particle Sensor
Sung-Ho Hong, Hong-Gyu Jeon, 2020. 11. 18 - 2020. 11. 21.
The Korean Society of Automotive Engineers, KSAE Autumn Conference 2020 (Shinhwaworld, Jeju), pp. 1309.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Evaluation of Grease Filling Rate in Bush with Variation of Working Conditions
Sung-Ho Hong, In-Seop Kim, 2020. 09. 24. - 2020. 09. 25.
Korean Tribology Society, 69th KTS Autumn Conference (Convention Center, Daejeon), pp. 269-270.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Literature Review of Machine Condition Monitoring with Oil Sensors-Application cases
Sung-Ho Hong, 2020. 09. 24. - 2020. 09. 25.
Korean Tribology Society, 69th KTS Autumn Conference (Convention Center, Daejeon), pp. 267-268.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Test Device for Machine Condition Monitoring System with Lubricant Oil Sensors
Sung-Ho Hong, Eun-Hyo Seon, Seo-Hyun Jun, In-Seop Kim, Hong-Gyu Jeon, 2020. 09. 24. - 2020. 09. 25.
Korean Tribology Society, 69th KTS Autumn Conference (Convention Center, Daejeon), pp. 205-206.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Development of Machine Condition Monitoring System in Axle of Construction Equipment
Sung-Ho Hong, Eun-Hyo Seon, Seo-Hyun Jun, In-Seop Kim, Hong-Gyu Jeon, 2020. 09. 24. - 2020. 09. 25.
Korean Tribology Society, 69th KTS Autumn Conference (Convention Center, Daejeon), pp. 203-204.
[2019]
Wireless Machine Condition Monitoring System with Ferrous Wear Debris Sensors
Sung-Ho Hong, Jae-Min Ha, Jun-Ik Cho, Mu-Gwang Seo, 2019. 11. 14.
The Korean Society of Mechanical Engineers, KSME Autumn Conference 2019. (Convention Center, Jeju), pp. 269-271.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CFD Analysis of Trap Effect of Groove in Lubrication Systems-Variation in Radius of Curvature of Groove Edge
Jun-Ik Cho, Sung-Ho Hong, 2019. 10. 23. - 2019. 10. 25.
The Korean Society of Tribologists and Lubrication Engineers, 68th KSTLE Autumn Conference (Hanwha Resort, Busan), pp. 106-107.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Machine Condition Monitoring System with Ferrous Wear Debris Sensor
Sung-Ho Hong, Jae-Min Ha, Mu-Gwang Seo, Jun-Ik Cho, Hong-Gyu Jeon, Jae-Hyeong Yoo, 2019. 10. 23. - 2019. 10. 25.
The Korean Society of Tribologists and Lubrication Engineers, 68th KSTLE Autumn Conference (Hanwha Resort, Busan), pp. 85-86.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Literature Review of Machine Condition Monitoring with Oil Sensors: Types of Sensors and Their Functions
Sung-Ho Hong, 2019. 10. 23. - 2019. 10. 25.
The Korean Society of Tribologists and Lubrication Engineers, 68th KSTLE Autumn Conference (Hanwha Resort, Busan), pp. 83-84.
[2018]
Improvement of Hydrophobic Surface Manufacturing Process in DLP Equipment
Sung-Ho Hong, Hye-Hyun Mun, Hyun-Jong Jin, 2018. 12. 12. - 2018. 12. 14.
The Korean Society of Mechanical Engineers, KSME Autumn Conference 2018 (High1 Convention Center, Gangwon-do), pp. 2748-2750.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Literature Review of Machine Condition Monitoring with Oil Sensors: Types of Sensors and Their Functions
Sung-Ho Hong, 2018. 12. 12. - 2018. 12. 14.
The Korean Society of Mechanical Engineers, KSME Autumn Conference 2018 (High1 Convention Center, Gangwon-do), pp. 2748-2750.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Improvement of Hydrophobic Surface Manufacturing Process with Photo-curable Resin
Hyung-Jong Jin, Hye-Hyun Mun, Sung-Ho Hong, 2018. 10. 31. - 2018. 11. 02.
The Korean Society of Tribologists and Lubrication Engineers, 66th KSTLE Autumn Conference (Alpensia Resort, Pyeongchang), pp. 170-171.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Evaluation of Grease Filling Rate in Bush with CFD
Gun-Woo Lee, Myoung-Sung Choi, Sung-Ho Hong, 2018. 10. 31. - 2018. 11. 02.
The Korean Society of Tribologists and Lubrication Engineers, 66th KSTLE Autumn Conference (Alpensia Resort, Pyeongchang), pp. 168-169.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A Comparative Study on the Characteristics of Varnish and Lacquer
Sung-Ho Hong, 2018. 10. 31. - 2018. 11. 02.
The Korean Society of Tribologists and Lubrication Engineers, 66th KSTLE Autumn Conference (Alpensia Resort, Pyeongchang), pp. 166-167.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Literature Review of Fabrication of Hydrophobic Surfaces with 3D Printer
Sung-Ho Hong, 2018. 04. 26. - 2018. 04. 27.
The Korean Society of Tribologists and Lubrication Engineers, 65th KSTLE Spring Conference (Hanwha Resort, Busan), pp. 178-179.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Fabrication of Hydrophobic Surfaces with Variation of Photocurable Resins
Sung-Ho Hong, 2018. 04. 26. - 2018. 04. 27.
The Korean Society of Tribologists and Lubrication Engineers, 65th KSTLE Spring Conference (Hanwha Resort, Busan), pp. 176-177.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Fabrication of Hydrophobic Surfaces with Stereolithography
Jin-Soo Park, Jong-Hoon Park, Hyung-Jong Jin, Sung-Ho Hong, 2018. 04. 26. - 2018. 04. 27.
The Korean Society of Tribologists and Lubrication Engineers, 65th KSTLE Spring Conference (Hanwha Resort, Busan), pp. 41-42.
[2016]
CFD Analysis of Sliding Bearing with Dimple and Groove by Grease Lubricant
Sung-Ho Hong, Hong-Gyu Jeon, Jae-Hyung Yoo, 2016. 10. 05. - 2016. 10. 07.
The Korean Society of Tribologists and Lubrication Engineers, 63th KSTLE Autumn Conference (Deogyusan Resort, Muju), pp. 91-92.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CFD Analysis of Trap Effect of Groove: Effect of Cross-Sectional Shape
Sung-Ho Hong, Dong-Hoon Kim, Hoon-Seok Kim, 2016. 02. - 2016. 04.
The Korean Society of Tribologists and Lubrication Engineers, 62th KSTLE Spring Conference, (Hannam University, Daejeon), pp. 25-26.
[2015]
Lubrication Characteristics in Fuel Injection Pump with Variation of Fuel Oils
Sung-Ho Hong, 2015. 10. 14. - 2015. 10. 16.
The Korean Society of Tribologists and Lubrication Engineers, 61th STLE Autumn Conference (Daemyung Resort, Gyeongju), pp. 123-124.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Improvement of Lubrication Characteristics in Fuel Injection Pump for Medium-Speed Diesel Engines: Application of Profile Shape
Sung-Ho Hong, 2015. 10. 14. - 2015. 10. 16.
The Korean Society of Tribologists and Lubrication Engineers, 61th KSTLE Autumn Conference (Daemyung Resort, Gyeongju), pp. 49-50.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Improvement of Lubrication Characteristics in Fuel Injection Pump for Medium-Speed Diesel Engines: Application of Grooves
Sung-Ho Hong, Bo-Ra Lee, Yong-Ju Cho, 2015. 10. 14. - 2015. 10. 16.
The Korean Society of Tribologists and Lubrication Engineers, 61th KSTLE Autumn Conference (Daemyung Resort, Gyeongju), pp. 47-48.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Optimal Design of Clearance in Fuel Injection Pump
Sung-Ho Hong, Jong-Kuk Park, Yeong-Seok Ryoo, 2015. 04. 16. - 2015. 04. 17.
The Korean Society of Tribologists and Lubrication Engineers, 60th KSTLE Spring Conference (Jeonbuk University, Jeonju), pp. 153-154.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
A Study on the Lacquering Formation in the Combination of Marine Fuel Oil and Marine Lubricant Oil
Sung-Ho Hong, Jong-Kuk Park, Yeong-Seok Ryoo, 2015. 04. 16. - 2015. 04. 17.
The Korean Society of Tribologists and Lubrication Engineers, 60th KSTLE Spring Conference (Jeonbuk University, Jeonju), pp. 57-58.
[2013]
A Study on the Lubrication Characteristics of Spool Valve with Various Cross Sectional Shape of Groove
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2013. 04. 26.
The Korean Society of Tribologists and Lubrication Engineers, 56th KTS Spring Conference (Technopark, Seoul), pp. 125-126.
[2012]
The Effect of a Spiral Oil Feeding Groove on the Performance of a Hydrodynamic Journal Bearing
Sang-Ik Son, Sung-Ho Hong, Kyung-Woong Kim, 2012. 10. 17. - 2012. 10.19.
The Korean Society of Tribologists and Lubrication Engineers, 55th KSTLE Autumn Conference (Ocean Suites Hotel, Jeju), pp. 129-130.
[2011]
CFD Analysis of Spool Valve with Various Cross-Section of Groove
Sung-Ho Hong, Kyung-Woong Kim, 2011. 04. 14.
The Korean Society of Tribologists and Lubrication Engineers, 52th KSTLE Spring Conference (Marina Resort, Tongyeong), pp. 43-44.
[2010]
Hydrodynamic lubrication Analysis of an Infinitely Long Slider Bearing with Micro-Grooves
Sang-Ik Son, Sung-Ho Hong, Sung-Gi Kim, Kyung-Woong Kim, 2010. 11. 19.
The Korean Society of Tribologists and Lubrication Engineers, 51th KSTLE Autumn Conference (Technopark, Seoul), pp. 135-136.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CFD Analysis of Spool Valve with Various Aspect Ratio of Groove
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2010. 11. 19.
The Korean Society of Tribologists and Lubrication Engineers, 51th KSTLE Autumn Conference (Technopark, Seoul), pp. 113-114.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Evaluation of the Validity of Reynolds Equation for Spool Valve Analysis
Sung-Ho Hong, Sang-Ik Son, Kyung-Woong Kim, 2010. 11. 19.
The Korean Society of Tribologists and Lubrication Engineers, 51th KSTLE Autumn Conference (Technopark, Seoul), pp. 61-62.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
CFD Analysis of Spool Valve Considering Cavitation
Sung-Ho Hong, Jin-Su An, Kyung-Woong Kim, 2010. 06. 17. – 2010. 06. 18.
The Korean Society of Tribologists and Lubrication Engineers, 50th KSTLE Spring Conference (KAIST, Daejeon), pp. 71-72.
[2006]
Automotive Interior Environment and HVAC System
Sung-Ho Hong, Moon-Uhn Kim, Man-Hoe Kim, 2006. 08.
Proceedings of the KFMA Annual Meeting, Korean Society for Fluid Machinery, pp. 853.